Air conditioning ARDESTO ACM-24ERP-R32-WI-FI-AG-S
Energy-efficient ARDESTO air conditioner with an ERP inverter will help to create comfortable conditions in your home or office at any time of the year (up to -20 °C). For easy control, the package includes a remote control and a wireless communication module to remotely configure the air conditioner via Wi-Fi.
Specifications
- Device typeInverter air conditioners
- Кoom size70 sq m
- Type of refrigerantR32 вага 1.45 кг
- Package contentsUser's manual з експлуатації Wi-Fi модуля та додатку Smart Kit / remote control / internal unit with bracket / external unit / optional elements for mounting / Wi-Fi module
- Cooling1
- Heating1
- FeaturesWi-Fi module
- Current (cooling/heating)10.5/9.3
- Energy class (cooling)A++
- Energy efficiency class (heating)A+
- Outside temperature range (cooling/heating), °C-15 ... +50/-20 ... +24
- Seasonal productivity ratio of the SEER/SCOP system2.91/3.44
- Indoor unit46 dBA /37 дБА/34.5 дБА/21 дБА (в залежності від режиму)
- Outdoor unit60 dBA
- Productivity (cooling)24000 BTU/h
- Productivity (heating)25000 BTU/h
- Power on cooling7 kW
- The power for heating4.9 kW
- Meas. operating temperature-15°С - +50°С (без втрати енергоефективності) / -20°С - +50°С (з невеликими втратами енергоефективності)
- Max. height difference25 m
- Diameter of refrigerant pipes (liquid)3/8
- Diameter of refrigerant pipes (gas)5/8
- Weight (net gross) indoor unit13.6/17.3
- Weight (net gross) outdoor unit43.9/46.9
- Supply voltage220-240 V
- Max. power consumption3700 W
- Width1083 mm
- Height336 mm
- Depth244 mm
- Dimensions ext. block955 х 342 х 673 мм
Inverter compressor
If a conventional air conditioner periodically turns the compressor on and off to reach or maintain the set temperature, the inverter reduces or increases its performance as needed. It allows to ensure lower noise level (56dB) and better energy efficiency, because the air conditioner does not operate at maximum power, but at the required one.
ERP inverter
Energy Related Products or "Ecodesign" is an important and integral EU regulation setting energy efficiency and other requirements for product design, therefore improving environmental performance of a product throughout its life cycle.
It’s aim is to reduce electricity consumption and CO2 emissions by 20% by gradually increasing the requirements for electrical appliances.
In simple terms, ERP data in air conditioning systems speaks of higher energy efficiency and safety for nature.
Low voltage operation
Low mains voltage is the most common problem. 160-180V – this is not enough for most household appliances and lamps.
ARDESTO air conditioners with ERP inverter can operate for cooling at 130V thanks to the built-in voltage stabilizer.
R32 refrigerant for better energy efficiency
The air conditioner uses R32 refrigerant, which is a modern, energy-efficient and environmentally friendly freon. In addition, it is characterized by high cooling performance at minimal cost.
Smooth operation at -20 °С
The device works without loss of energy efficiency at temperatures from -15 °С to +50 °С, and with small losses even at -20 °С! But power consumption directly depends on the temperature outside, for example: at -7 °С it uses 3.717kW, and at +7 °С it uses 1.472kW. The seasonal energy efficiency coefficient of the split system in cooling mode is 7.0, and the capacity is 18,000BTU/h. The seasonal energy efficiency coefficient of the split system in heating mode is 4.0, and the capacity is 19,000BTU/h. The noise level of the internal unit is 56dB.
Modes and functions
Customizable modes and special functions will help you to optimize air conditioner operation in accordance with your needs. There are four main operating modes: Drying, Fan, Cooling, Heating. In addition, there are additional advanced features, including setting the direction of the air flow, the ability to rotate the blinds (horizontal, vertical), operation in Eco mode, Sleep, Turbo, Clean functions and, of course, the timer.
Control via remote control or wireless communication module
In addition to the standard remote control, it is possible to control the air conditioner remotely. To do this, you need to connect the Wi-Fi module to the indoor unit, download the Nethome Plus app (compatible with iOS and Android), and make the necessary settings. This will not cause difficulties, because the package includes detailed instructions. After installing the application, you will find interesting functions, such as "Share", which allows several users to control the air conditioner at the same time, as well as "Test" to easily check the operating parameters of the air conditioner.